|
|
|
|
|
|
Dakota Alert DVR-01 Digital Video Recorder with 4GB microSD Card
|
|
|
The DVR-01 uses a PIR detector and a digital video recorder to record 30 seconds of video and audio every time a person passes in front of the sensor.
|
|
|
|
|
|
|
|
|
|
Dakota Alert AD-01 KIT Auto Dialer with Wireless Accessories
|
|
|
The Auto Dialer (AD-01) is a do-it-yourself security solution for home or office use where land line telephone service is available. The dialer can send a voice message to up to nine different phone numbers. The dialer can be programmed with entrance/exit delay and will be triggered by various hard wired sensors. Two different voice messages can be programmed for alarm or tamper conditions. The AD-01 is a very cost effective alternative to monitored security systems.
|
|
|
|
|
|
|
|
|
|
Dakota Alert AD-01-S Slave Auto Dialer without RF Link
|
|
|
Slave Auto Dialer (no RF link)
|
|
|
|
|
|
|
|
|
|
Dakota Alert CAD-03 KIT Portable GSM Cellular Auto Dialer
|
|
|
The Cellular Auto Dialer (CAD-03) provides an easy do-it-yourself security solution. The rugged construction of the control panel/dialer allows the system to be used at construction sites, in vehicles and other areas that are difficult to monitor. The dialer uses the GSM cellular network to send a voice message to up to nine different phone numbers. The dialer can be programmed with entrance/exit delay and will be triggered by various wireless sensors or a tamper alarm.
Kit Includes:- 1 control panel/GSM dialer
- 1 wireless PIR sensor
- 1 wireless shock sensor
- 1 power supply
- 1 back-up battery
|
|
|
|
|
|
|
|
|
|
Dakota Alert CAD-05 KIT Home GSM Cellular Auto Dialer
|
|
|
The Cellular Auto Dialer (CAD-05) is a do-it-yourself security solution for use in homes, cabins, offices and other locations that need to be monitored. The dialer uses the GSM cellular network to send a voice message to up to nine different phone numbers. The dialer can be programmed with entrance/exit delay and will be triggered by various wireless sensors or a tamper alarm. Two different voice messages can be programmed for alarm or tamper conditions. It can also be used with other wireless accessories such as door contacts, etc.
Kit Includes:- 1 control panel/GSM dialer
- 2 wireless PIR sensor
- 2 wireless keyfobs
- 1 power supply
- 1 back-up battery
|
|
|
|
|
|
|
|
|
|
|
Dakota Alert CAD-05-S GSM Slave Auto Dialer without RF Link
|
|
|
GSM Slave Auto Dialer (no RF Link)
|
|
|
|
|
|
|
|
|
|
Dakota Alert IR-3000 Wireless PIR Sensor
|
|
|
Extra wireless transmitters can be used in other locations.
|
|
|
|
|
|
|
|
|
|
Dakota Alert IRWR-3000 Wireless Indoor Infared Alert Kit
|
|
|
The IRWR-3000 is the newest wireless PIR sensor from Dakota Alert. With a wireless range of up to 600 feet and full compatibility with any of our 3000 Series transmitters or receivers, the IR-3000 will allow you to monitor many locations that were difficult before.
The passive infrared detector is able to monitor an area up to 100° wide. With the integral mask, the detection area can be narrowed down to 20° or anywhere in between. With the swivel mount, the IR-3000 sensor can be adjusted right to left up to 80° and up and down up to 50°. With three different sensitivity settings, the IR-3000 can detect a person up to 12 feet, 25 feet, or 40 feet away. The sensor can also be set to flash an LED or stay dark when a signal is sent.
The IR-3000 is powered by one 9 volt battery and will have a battery life of about 12 months under normal conditions. There is also a low battery alert to notify you when it is time to replace the battery. The IR-3000 is designed for indoor or light duty outdoor applications under an eave, awning, or other protected location.
The WR-3000 is the receiver for the IRWR-3000 system. The WR-3000 plugs into a standard wall outlet and can be placed on a table or mounted on a wall. When the receiver gets a signal from the transmitter, one of four different tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level.
|
|
|
|
|
|
|
|
|
|
Dakota Alert M538BS 2-Way MURS Base Station Radio
|
|
|
The M538-BS is a base station MURS transceiver that will receive alert signals from the MURS Alert transmitter and also can be used for two-way voice communications between other MURS transceivers. The BS has five channels and 38 sub channels to help you communicate with other users. The M538-BS is powered by a plug-in transformer. The BS is capable of communicating over distances of several miles. The FCC also allows you to use MURS without a license. Although other radio services require a license, MURS is license-free.
When an alert signal is received from the MURS Alert transmitter, the BS will sound off with the voice of the alert signal, and will also display an alert icon as a visual cue that a signal has been received. In addition, the M538-BS is equipped with a normally open (N/O) relay output. The relay can be used to connect the base station to other existing systems such as alarm panels or doorbells. This has many different applications for small businesses, farmers, security guards or outdoorsmen. Anyone who needs to have real time monitoring and two-way voice communication will benefit from MURS.
The base station can also be used to communicate with the M538-HT hand-held radio. This allows someone in the house or shop to be in direct contact with someone out in the field. This allows a parent to keep track of the kids, or a supervisor to stay in touch with their employees.
|
|
|
|
|
|
|
|
|
|
Dakota Alert M538HT MURS 2-Way Handheld Radio
|
|
|
The M538-HT is a hand-held MURS transceiver that will receive alert signals from the MURS Alert transmitter and also can be used for two-way voice communications between other MURS transceivers.
The HT has five channels and 38 sub channels to help you communicate with other users. The M538-HT is powered by six rechargeable batteries (included) that will last for about 40 hours per charge. The HT is capable of communicating over distances of several miles. The FCC also allows you to use MURS without a license. Although other radio services require a license, MURS is license-free.
When an alert signal is received from the MURS Alert transmitter, the HT will sound off with the voice alert signal, and will display an alert icon as a visual cue that an alert signal has been received. This has many different applications for small businesses, farmers, security guards or outdoorsmen. Anyone who needs to have real time monitoring and two-way voice communication will benefit from MURS.
|
|
|
|
